– Your thread could be caught on something between the needle and your spool of thread if so, your thread will be too tight for the needle to pick up the bobbin thread. … – Make sure that the needle has been installed correctly. The flat side of the needle should be facing toward the back of the machine.
Why isn’t my sewing machine grabbing the bobbin thread?
There could be several things that could cause the machine not to pick up the bobbin thread. The upper thread could be tangled. Remove the thread completely from the machine. The correct size spool cap should be used for the size of the thread spool.
Why isn’t my needle picking up the bobbin thread?
First, make sure the bobbin-winding spindle (located on top of your machine) has been pushed back to the left for sewing. If it is not in the correct position, the needle will not go down and pick-up your bobbin thread. … If the timing is out, the needle thread is not meeting the bobbin thread in time to form a stitch.
Why is my bobbin winder not working?
Check if you aligned the groove in the bobbin with the spring on the bobbin winder shaft and pressed down on the bobbin until it snapped into place. Check if the thread is passed through the bobbin winding guide correctly. Check if there are scratches or other defects on the bobbin. Replace the bobbin if in doubt.
How do I know if my timing is off on my sewing machine?
If your hook tip is passing through or below the needle eye, then the timing of the sewing machine is off. On the other hand, if the hook tip is passing above the needle eye, but extends past the needle more than a couple of millimeters when the needle eye meets the radius of the hook, then the timing is also off.
Is the bobbin supposed to spin?
Be sure the bobbin is inserted so that the bobbin will turn clockwise when the thread is pulled. … The bobbin should be turning clockwise when thread is pulled. If the thread unrolls in the wrong direction, it may cause the thread tension to be incorrect or break the needle.
Why is my bottom thread bunching up?
Your Thread Tension Is Too Tight
Sewing machine manufacturers suggest that you don’t mess with your bobbin thread tension too much, but you should adjust your upper thread tension if you keep getting bunched up thread underneath your fabric. If your tension is too tight, it can pull your thread and break it.
How do you tell if your bobbin tension is off?
Swiftly pull up on the thread. The thread should unwind just slightly and the bobbin case should drop an inch or two. If the thread unwinds without resistance and the case slips to the floor, your bobbin tension is too loose. If the bobbin case doesn’t budge, your bobbin tension is too tight.
Can I sew without a bobbin?
You will not be able to “sew” anything without a bobbin. Top thread requires the bobbin thread to create a knot with each stitch and hold the thread in place.
What causes sewing machine timing problems?
The hooks are the most common issue concerning sewing machine’s timing. The second most common issue is related to the needle. The first step is to check the sewing machine’s timing to make sure that there is a problem. … If the hook is turning counter-clockwise, the needle must be moved to the far left.