A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
Why does my bobbin keep coming unthreaded?
If the thread is not smooth, is uneven, has knots, or is very loose on the bobbin, it has not been threaded correctly. Knowing how to wind a bobbin eliminates this risk. Another thing to check is whether the bobbin is inserted in the bobbin case correctly.
Why does the thread bunch up underneath?
Your Thread Tails Are Too Short
If the thread tails that come out of your bobbin are shorter than two inches, they may get sucked into your sewing machine when you begin to sew. This can cause thread bunching underneath your fabric.
Why is my Singer sewing machine looping underneath?
Thread looping on the underside of the fabric is always an indication that the upper thread is not correctly threaded. This happens when the upper thread is not correctly placed in the tension mechanism and has not been threaded through the take-up lever.
If your thread is pulled tight on the underside and not forming an even stitch then (counter-intuitively) it’s usually the top thread tension that’s wrong. Sometimes very lightweight fabrics such as sheers can get dragged down into the machine so it’s a good idea to use a straight stitch plate.
How do you fix bobbin tension?
To tighten your bobbin tension, turn the tiny screw on the bobbin case a smidgen clockwise. To loosen bobbin tension, turn the screw counterclockwise. A quarter turn or less is a good place to start.
Why does my bobbin keep tangling?
If your sewing machine thread is not properly threaded, the bobbin thread won’t be pulled up into the fabric the way it needs to be. Occasionally the upper thread can catch on a moving part or get stuck, which impedes the easy flow of thread through the needle, creating a tangle.
Why is my sewing machine bird nesting?
Bird nests occur when thread bunches up underneath the needle plate, causing broken threads, skipped stitches, or uneven tension. This is typically caused by the top thread not being threaded correctly or a sewing machine tension issue.
How do you stop thread bunching?
A good cleaning may solve your bunching woes (check your manual for guidelines on cleaning and maintenance; your machine may also need to be oiled). To prevent stitch glitches, be sure to frequently dust underneath the throat plate and along the thread path, and to periodically clean and oil your machine.
What number should tension be on sewing machine?
The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.
How do I stop my sewing machine from looping?
Looped stitches are usually caused by improper tension. If the loop is on the upper side, it may be corrected by loosening the top tension or by tightening the lower tension. If the loop is on the under side, it is usually best corrected by adjusting the upper tension.
Why does my sewing machine keep jamming underneath?
The reason for the problem could be lint, dust and other debris getting stuck in their mechanism. The solution: Stop work, lift the presser foot and thoroughly clean the fee dogs from any debris. Also, make sure that they are lifted up in a raised position allowing for a proper grip of the fabric.
Why is the tension wrong on my sewing machine?
When sewing fabrics together problems can occur when the thread tension is not correct, the needle or bobbin is not inserted properly, or the machine is not threaded correctly. … Check you have chosen the right needle size and thread to suit the fabric type and weight.
Why is my stitch wavy?
1. The presser foot you are using is incorrect. – Attach the presser foot that is correct for the type of stitch you want to sew.
Why is my zig zag stitch going straight?
If the upper thread appears as a single line, the lower thread is incorrectly threaded. Instead of the appropriate tension being applied to the lower thread, it is pulled through the fabric when the upper thread is pulled up.
Why is my zig zag stitch loose?
The middle row of stitches on the swatch is very loose in addition to not looking right. Solution: Rethread the machine. If that doesn’t work, adjust the tension. Explanation: When the thread loops on the backside of the fabric, that’s an indication the upper thread is not threaded correctly.