Why does my upper thread keep getting caught in the bobbin?
This can be caused if the top thread tension is too tight, or if the bobbin thread is not in the bobbin case tension. … Make sure the bobbin is correctly seated in the bobbin case (bobbin holder), and check that the upper thread tension is not set too tightly.
Why does my sewing machine keep jamming underneath?
The reason for the problem could be lint, dust and other debris getting stuck in their mechanism. The solution: Stop work, lift the presser foot and thoroughly clean the fee dogs from any debris. Also, make sure that they are lifted up in a raised position allowing for a proper grip of the fabric.
Why does the top thread keep bunching up underneath?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
How do you adjust bobbin tension?
To tighten your bobbin tension, turn the tiny screw on the bobbin case a smidgen clockwise. To loosen bobbin tension, turn the screw counterclockwise. A quarter turn or less is a good place to start.
What thread tension should I use?
The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.
Why does the thread on my sewing machine knot up under the material?
If the thread has knots, is not smooth, is uneven, or is loose on the bobbin, then it has not been threaded correctly. If your machine uses a bobbin case, follow your sewing machine’s instructions to remove the bobbin from the case and re-thread it. … Be sure that you have the bobbin thread engaged in the bobbin tension.
What are the common sewing machine troubles?
Common Sewing Problems
- Needle thread breakage.
- Bobbin or looper thread breakage.
- Thread fusing when the machine stops.
- Skipped stitches.
- Imbalanced / variable stitching.
- Staggered stitching.
- Variable stitch density.
- Seam pucker.
Why is the tension wrong on my sewing machine?
When sewing fabrics together problems can occur when the thread tension is not correct, the needle or bobbin is not inserted properly, or the machine is not threaded correctly. … Check you have chosen the right needle size and thread to suit the fabric type and weight.
What tension should I use for cotton?
Cotton requires a moderate tension setting, usually between three and four.
What is the remedy when the upper thread breaks?
Remedies: Check the threading order and thread correctly. Adjust the tension disc. Replace blunt or bent needles.